Wish there was an easy way to turn your VESC on and off? This simple toggle switch can be installed between your ESC and your battery, and can be used to easily turn your electric skateboard, bike, or small vehicle on and off.
This switch is anti-spark, meaning it will eliminate the sparks from standard physical connections. You can use this switch for LiPo voltages of 6s, all the way up to 12S.
The physical MOSFET array is controlled with a waterproof toggle button, which has a blue LED for a professional look and feel. Simply drill a 18mm hole for the button, then connect the switch between your ESC and your battery.
Since there are many different connectors, this switch does not come with any. Instead, the switch comes with 2.5” 10 AWG flexible leads, which are pre-tinned with low-temperature solder, so you can easily solder it to any connector or component you want.
In addition to the switch and the blue LED toggle button, this switch also comes with some black heat-shrink tubing to protect from short-circuits.
- Max Current: 80+ amps
- Resistance: 0.8-2.0mΩ
- Input voltage: 6s – 12s LiPo (20v – 55v)
- Absolute max voltage: 75v
- Toggle Button Hole Diameter: 19mm
- Toggle Button Lead Length: 20cm
- PCB Dimensions: 5cm x 5cm
Installation is easy. Simply solder the input wires to your battery (or a set of connectors which connect to your battery), and solder the output wires to your ESC. Then, connect the LED toggle button using the included connector. For soldering, the far apart red and black wires are the input, and the wires which are close together are the output.
By purchasing this product, or using any services on this website, you automatically agree to our Terms and Conditions policy, as outlined here.