About Me

000209AL_2PRND2DX_Pomogaev_000053Hello!

My name is Vlad, and this is my business venture website. My newest venture is the design and manufacture of a Bluetooth Android Controller, which can be used to control electric skateboards, RC cars, and boats.

I strive to make you the best product possible by being transparent about the way I make, and design products. I have a lot of documentation about my controller on my YouTube channel, and you can always contact me with any questions or concerns at [email protected]

All of my items are shipped from Vancouver, Canada, via Canada Post, which means you will not have to wait over a month, like for other overseas eCommerce sellers. My sales are done via PayPal, and you can find all of my current listings here.

I would like to thank you for checking out my website. If you have any questions, you can contact me through the comments on this post! Here’s a list of products I have available:

9 thoughts on “About Me

  1. Hello Vlad,
    My name is Chris and I need some help and insight with an E-Glide Magnum 44 electric skateboard that I just picked up.
    My situation is that the skateboard has only the deck(obviously), trucks, wheels and motor. The wires have been cut right at the riser and truck. It has no battery, no electronics/batt. cover and no handheld control. if needed I can send pics.
    I am on a tight budget of around slim to none and am a D.I.Y.er myself. I have some knowledge concerning electronics and fabrication. However I am not sure where to start to find suitable (if any) re-purpose parts. Example: The guy gave me a speed control board from an electric lawnmower/ trimmer.
    I was thinking of a diy rheostat or pot. handheld controller, but after finding your vids and website, I am thinking of the bluethouth set up that you have.
    Any and all help is greatly appreciated.

    1. Hi Chris,
      Sounds like, apart from the wires that are cut at the riser, your board is actually in pretty good shape. It’s actually pretty hard to find details surrounding the exact model of skateboard you have. I have a feeling that,if your board has a brushless motor, you might be able to use the electronics of my first electric skateboard, and simply connect them to the existing motor (http://www.instructables.com/id/Electric-Longboard/).
      I highly recommend you post detailed pictures of your board on (http://www.electric-skateboard.builders/). I can help you out on there, and so can other people. You probably will not be convert the control board from an electric trimmer.
      Thanks!
      Vlad

    2. Hey, Vlad this is Liza. HAPPY BIRTHDAY, all my friends from school also wish you a happy birthday. And hope you have a wonderful time (WE EVEN SEARCHED YOU UP ON GOOGLE AND FOUND YOU) -Liza, Nushin, Leige-Ann and Halley Cat

  2. Hey, Vlad this is Liza and friends We all want to wish you a HAPPY BIRTHDAY and that we all care greatly for you ( We searched you up on google and turns out your famous) again Happy Birthday and all my friends also wish you a nice B-day ( Nushins , Leige-Ann and Halley Cat’s Comment) happy birthday Vlad (:

  3. Hi Mate, Just wanted to know when you will have the 4.4kw High power switch back in stock for the VESC. Can you send me an email when you do, and ill make an order. Thanks

Leave a Reply

Your email address will not be published. Required fields are marked *